How to Clean Microphone Pop Filter in an effective way?

Hygiene is the fundamental personal need for all living beings. For a hygiene freak like me, sanitization of Pop filters carries the same significance as personal hygiene.

Many of you often ask how to clean a microphone pop filter?

So, in this article, I would try to give precise answers to all the questions that pop in our minds when we think about pop filter sanitization.

Why Should I Clean Microphone Pop Filter?

Cleaning electrical gadgets is an unconventional practice. The first question that pops into our minds when we hear about cleaning the pop filter is, WHY should I even do that.

Frequently, we observe our microphone dispensing a strange stinky smell which makes it troublesome for us to sit and speak in it.

Most of the time, we are cursing the manufacturer for producing a microphone with such low quality, but such a situation occurs when my pop filter is not properly clean. Thorough cleansing of a pop filter can eliminate this complication effectively.

Moreover, Mic is in approximate contact with our mouth. Contaminated pop filter surface can lead to respiratory infections and damaging overall health.

Besides that, sound quality is also affected because of the poor hygiene of our microphone.

 How Do I Clean Mesh and Nylon Pop Filter?

  • Firstly, remove the pop filter from the microphone stand.
  • Thoroughly clean it with the help of a disinfectant such as isopropyl alcohol.
  • If the fabric of your filter is nylon, foam, or mesh-based then the use of soap and detergents would be more effective in eliminating the impurities.
  • Once you have cleaned your pop filter from dust, the use of heat and UV rays can kill the present harmful microbes.

Role of Light and Heat in Shielding your Pop Filter

Light and Heat act as a microbial shield for the surface of your pop filter. There are numerous ways we can use heat and light.

Keeping your accessory in sunlight for 72 hours (about three days) can play an efficient role.

The use of steam and heat from the microwave oven also eliminates the microbes to a great extent as they cannot bear such extreme conditions and die.

Can I Use Microphone Covers Against Covid Protection?

Covid is an acute respiratory illness caused by a virus and primarily spreads through contact with the nose and mouth.

Of course, we cannot stop using our microphones during the pandemic. Covering the microphone carries the same significance as a mask on the face.

In such circumstances, it is necessary to take adequate precautions covering your microphone and, properly sanitizing the cover is one of the measures. Through which we can reduce the probability of the infection via the gadget.

Best Microphone Covers for Covid Protection

Diverse options are there in the market when we talk about microphone covers. From using disposable plastic covers to foam covering and windscreens.

Each of them carrying its pros and cons. We would be discussing the factors that affect our choice of microphone covers in the succeeding paragraphs.

Plastic Bags as Microphone Covers

Plastic bags drew over your microphone neither too tightly nor too loosely can effectively protect against covid by shielding the surface area from spit that can land over the microphone while speaking and later cause life-threatening effects.

But at the same time, if unnecessarily tighten or density is comparatively increase, it can affect the quality of our audio output by interfering with the transfer function of our microphone, resulting in disturbed resonance and frequency.

Foam and Nylon As a Protection To Covid

Many of us think that foam and nylon play a vital role in defending covid because of the density of the fabric.

So, give a preference over the plastic bag but, it is necessary to mention the analytical fact about the material.

Foam and nylon both are absorbent hence can significantly increase the risk of exposure to the virus. Thereby it is directed to prefer plastic bags over nylon and foam.

Size And Shape Variation of the Microphone Cover

A vast range of size covers is available in the market. It is fundamental to know which coat suits our microphone perfectly.

Measuring the area of the microphone head and determining the length of the speech section give us a clear idea of which size of cover to choose.

As invalid length and width of the microphone cover can lead to drastic outcomes. So, we need to be very careful in taking the correct measurements. A broad range of shapes is also available to fit every need.

Small Size Covers

If your microphone head ranges from 2.13 to 3 inches, plastic bags ranging from approximately 4 to 5 inches are best suited for your microphone without interpreting the sound quality.

Check some of the bests at Amazon.com. They ensure that safety obliges not to be compromised.

They are user-friendly in all the ways one can think. Firstly, they do not require extensive operation procedures. I’m using the accessory since the onset of the pandemic. I hardly faced any interruption in my sound quality or output.

They are pocket-friendly. We can get hundreds of pieces at a bargain price. If we are disposing of these microphone covers after use, they are not at the risk of harming the environment as these are manufacture with high-quality biodegradable materials.

All the mentioned factors making them must try accessory.

Large Size Covers

Large size coves are manufactured for the mick head size 3.5 inches to 4 inches. These covers come in different dimensions ranging from 6.1 to 7.8 inches approximately.

On a condition, we all are searching for one of the best quality mics without disturbing our budget. You can visit amazon to find the large size covers.

The Majority of professionals prefer these covers for everyday use. Not only to ensure protection but also to ensure smooth voice notes.

According to the customers quality of the covers are reliable and reasonable to use.

Conclusion

Cleansing and covering your microphone are some of the preventive measures that you can take during microphone use.

It not only to improve our hygiene but it also plays a significant role in defeating covid.

It also plays a role in enhancing the durability of our products by keeping small particles and the ill smell away from the microphone that can cause us to repulse our microphones and affect the output quality.

Frequently Asked Questions (FAQ’s)

1- How do you clean the inside of a microphone?

Cleaning a microphone plays an initial role in the hygiene of your studio. But if not cleaned the right way, it can take your microphone the other way round. There are different ways to clean a microphone from the inside. You use different methods to clean different microphones. For instance, cleaning of lavalier microphone is different from cleaning a standard pencil or handheld microphone.

To clean a lavalier microphone, you need distilled water and wipe the surface gently with a clean cloth. Now you can remove the outer pop filter if applicable. Gently dip your microphone into the water or other disinfectant such as isopropyl alcohol. After washing, you should make sure it is dry. To clean your pencil or handheld microphone, remove the pop filter and remove the outer covering of your microphone. Once you have removed the shield, gently with a soft cloth wipe inside of the microphone, use detergent or a disinfectant for cleaning. Wait for 42 to 66 hours before using the microphone. You can also use UV radiation or place your microphone in the oven. Putting the microphone in an oven can damage its life expectancy.

Are two pop filters necessary?

You can use double coverings over the microphone to enhance your audio quality. Singers and professionals use this trick to prevent noise and obs. During live performances, the use of a double filter not only protects the quality of your audio but also protects the infrastructure of your microphone. But if you are using it in a remote environment such as a studio. The use of two pop filters is not necessary.

What does a pop filter device filter out?

Pop filter, as the name shows, protect your microphone from unnecessary noises. You can use a pop filter for a variety of purposes, such as:

Elimination of obs

Environmental noises such as fast-moving air

It is also a protection from the plosives

On the side work, the pop filter also protects the infrastructure of your microphone from dust and other pollutants.

Do pop filters filter out breathing?

The prime purpose of a pop filter is to eliminate unnecessary noises and distractions from your audio. Breathing is one of the biggest problems of recorded audio. You can effectively remove the breathings out by using a pop filter.

Leave a Comment