Starting with the introduction to ASMR, which is also known as autonomous sensory meridian response microphone is a high-definition microphone used to produce auditory effects in a voice note while the crisp sound quality remains intact. There are plenty of microphones available but I have listed the best ASMR microphone in this article. Let’s dive into details.
In movies and Vlogs, you often listen to some gentle whispers, or sometimes it ball hitting the floor and the other time’s someone chewing their meal. Credit for these perceptible effects production goes to the ASMR microphone. Today there is a wide variety of microphones available, making it hard for the individual to decide which one to pick.
Some properties of a good ASMR microphone are low self-noise (It prevents excessive humming in the microphone during recording sessions). Power mode( There are two power modes available for any microphone. One is the phantom power mode, and the other is USB adapted power depending on the genera of your audio device. Experts recommend using a phantom power supply for ASMR-type mics. As it processes audio in a more sophisticated way.) The recording path is another integral factor. Binaural and Monodirectional paths are available.
I recommend Binaural for 3 d effect and monodirectional for quiet hums. Likewise, a sensitive mic is a more suitable option in the world of ASMR effects. These are some of the fundamental features that you should check before choosing a mic. For more in-depth analysis, refer to the complete article.
In the article, I will review the top ten best picks of ASMR microphones. Their technical features, pros, and cons. It will help you in future choices. So stay tuned till the end.
- List of Top 3 ASMR Microphones
- 1- Rode NT-1 A- Best Home Studio ASMR Microphone
- 2- Shure SM7B- Best ASMR Microphone for Vloggers
- 3- Blue Yeti Microphone- Best Beginners ASMR Microphone
- 4- Audio Technica AT2050- Best Podcasting ASMR Microphone
- 5- Zoom H4N- Best Recording ASMR Microphone
- 6- Audio Technica AT875R- Best Shotgun ASMR Microphone
- 7- LyxPro SDPC-2- Best ASMR Microphone for Live Sessions
- 8- ATR-2100- Best Production House ASMR Microphone
- 9- Neumann TLM 102- Best Indoor Studio ASMR Microphone
- 10- SE Electronics X1 Large ASMR Microphone
- Buyer’s Guide for Best ASMR Microphones
- Frequently Asked Questions (FAQs)
- Can I use any mic for ASMR?
- How much does ASMR MIC cost?
- Why are ASMR mics so expensive?
- How do I choose a mic for ASMR?
- Is a Blue Yeti good for ASMR?
- How do I record ASMR audio?
List of Top 3 ASMR Microphones
Rode NT-1 A Microphone
||CHECK ON AMAZON|
Shure SM7B Microphone
||CHECK ON AMAZON|
Blue Yeti Microphone
||CHECK ON AMAZON|
1- Rode NT-1 A- Best Home Studio ASMR Microphone
Rode NT-1 A is a good choice for those looking for quality and sleeky patterns at the same time. Rode NT-1 A is an XLR condenser microphone with a digital signal processing unit. They construct it using stainless steel, which means moisture won’t damage your microphone, but one should be cautious. Experts recommend it as an ideal microphone for home studios and professional use.
Like any XLR microphone, it also requires phantom power for its function, and its setup asks for time. But let me mention here that the adventure is worth the money and energy you spend on the setting. If I talk about Rode performance as an ASMR microphone, it is a considerable choice because of its sensitivity. Rode N-1 A is a highly sensitive microphone. It processes up even the slightest occurring murmur. Its vast frequency range makes it possible for the user to record every type of sound.
- Rode N-1 A is a condenser microphone.
- It follows a cardioid pattern.
- Weighs about 326 grams, and its dimensions are 190 x 50 x 50 mm.
- Build up of stainless steel.
- The frequency response for Rode N-1 lies between 20 Hz to 20 kHz.
- The maximum SPL is 137 dB SPL.
- The dynamic range falls less than 133 dB.
- Rode N-1 A has a built-in shock mount.
- 48 + volt phantom power is required to run the system.
- Contains gold-plated output connectors.
- The microphone is externally polarized.
- Also has a JFTP impedance converter.
- Metallic dusty nickel finish.
- One-year warranty included.
Rode N-1 A is part of home studios and many professionals’ life. Users express positive reviews regarding the microphone, and the microphone stands 4.8 stars on Amazon. It picks up even the slightest sound, which is the quality of an ideal ASMR microphone. Its metallic finish and delicate design are a side luxury for the users. You can record anything using the mic, let it be the roar of a plane or soft humming. Another point is that audio recorded through this microphone does not require much editing as the self-noise of the mic never interferes with the audio input or output.
Coming to the other side of the story, users that need to record sessions in different places find it difficult to carry around because of its weight.
Some users tend to admire the peak sensitivity of their microphones. On the other hand, some users complain about its hypersensitivity as it picks up unwanted background noises.
2- Shure SM7B- Best ASMR Microphone for Vloggers
Shure SM7B remains at the top of my list when I talk about ASMR microphones. Firstly it is a good all-rounder microphone that picks up sound signals in a specified direction. This property of the microphone contributes to the sound reduction from the background. Studio experts and Vloggers usually use this mic for recording and broadcasting purposes.
It has a broad-spectrum response to frequencies. Which means it can easily accommodate high and low-range audio signals. Apart from this inbuilt windscreen effectively helps to reduce vibrations from shocks and other resources. The user of Shure SM7Bwill also not face a problem of electromagnetic humming, which usually occurs in most microphones.
- Shure SM7B is primarily used to record and broadcast.
- Falls under the range of the dynamic microphone.
- Carries a cardioid polar pattern.
- Weighs about 766 grams and is 13.3×7.2×4.2 inches.
- Supports a mono audio field.
- Follows pressured operating system.
- Shure SM7B supports 50 Hz to 20 kHz of the frequency range.
- Impedance remains to be 150 Ohms and sensitivity -59 k dBV at 1kHz, respectively.
- Mic follows an analog XLR connection with a 1x 3 XLR pins cable.
- Adding to the features of the microphone includes a low pass filter that disposes of cacophonic audio notes. It makes the final version flawless.
The majority of the users show a satisfactory response with the recording quality and handling of Shure Sm7b. Users report that they consider Shure SM7B an ideal ASMR microphone due to its ability to pick up even the slightest voice note. Users can easily handle the microphone and can go a long way. But if we look at the other side of the story minority of users share their experience as unworthy because of its incompatibility with the iPad and unsatisfactory cable quality.
3- Blue Yeti Microphone- Best Beginners ASMR Microphone
Blue Yeti microphone is a good option for beginners. It works well in various recording environments. Blue Yeti is a convenient and easy-to-use device with an executive finish look. USB connection is what makes it easy to set up and use. Many people think that a USB microphone can not go as well as XLR microphones do, but with the help of 3 dedicated capsules, blue yeti blows away the myth, its crisp audio quality.
You cannot decide quality just by looking at a price tag. Blue yeti can pick even the slightest noise, which is the prime goal of an ASMR microphone. It offers its users different modes of recordings. Each mode activates the capsule of the respective polar pattern. For instance, as we know, the cardio pattern is ideal for one-person recordings. In ASMR recordings, users can use it to record chewing, scratch noise, etc. Similarly, you use an omnidirectional feature to record surrounding noises such as chairs falling in a room.
Here let me add another feature that is the beauty of the Blue yeti microphone and is not available with any other mic, and that is its mute feature. You can mute your mic when unnecessary sounds strike the diaphragm of your mic.
- Blue yeti microphone falls under the condenser microphone category.
- Yeti follows a USB connection and delivers digital signal output.
- Due to the presence of multiple capsules, yeti is multi-patterned.
- The frequency range for this model of microphone falls between 20 Hz to 20 kHz.
- The blue yeti sample rate is 48 kHz.
- Blue yeti has 16 bits as a bit rate.
- Microphone weighs about 0.55 kg, and dimensions are 4.72″ (12cm) x 4.92″(12.5cm) x 11.61″(29.5cm)
- Blue yeti usually come in black or silver color with a metallic finish.
- Microphone consumes 5V of power.
- A mute button is available.
Users are chiefly happy with the recording of Blue Yeti microphones. They report that blue yeti microphones give them a very professional audio experience, just like XLR microphones. If I add more to the topic, blue yeti microphones are easy to set up and use.
I consider the critical side of the user experience. Some users claim that due to the unavailability of a stand, They find it challenging to manage the Blue Yeti microphone.
4- Audio Technica AT2050- Best Podcasting ASMR Microphone
Back in 2008, Audio Technia released the AT2050 microphone. It is an all-rounder microphone from word all-rounder writer aim that it can go both ways. It can act as a USB microphone and an XLR microphone according to the user’s needs. Professionals use this microphone for studio recordings, podcasting, and its crisp audio quality can go with live sessions effectively.
Another factor that the majority consider while buying a microphone is the frequency response of a microphone. Audio Technica AT2050 offers an extended frequency response during an audio session. It means you can record multiple frequency audio without having to switch your microphone, and Audio Technia will surely pick the slightest voice note. Adorning its features is its elegant matte look and tonality under a reasonable price tag make this microphone a considerable choice for studio freaks.
- Audio Technica AT2050 is a condenser range microphone.
- It follows multiple polar patterns. Some are cardioid, eight-figure, and omnidirectional, respectively.
- Mic weighs about 416 grams, and its dimensions are 6.69 X 2.05 inches.
- The microphone offers a frequency from 20 Hz to 20,000 Hz.
- You get up to 17 dB SPL of noise suppression with this microphone.
- The dynamic range of AudioTechnia 2050 lies in the region of 132 dB minimum, and 1kHz is its maximum range.
- Mic contains three pins integral XLMR for output connections.
- Required phantom power for smooth application is typically between 11-52V DC, 4.7 mA, respectively.
- Microphone acquires switches for polar pattern selection that is flat, and nominally 10 dB pad is available.
- Offers two years replacement warranty with this microphone.
Users express positive reviews for this microphone mostly. They report that this microphone offers good audio quality worth the money you spend on the instrument. Thanks to the multiple polar patterns. It saves the time and effort that you put in searching multiple microphones with different directional orders. Its high pass filter and shock mount ensure that you record your voice notes or play them live without any hurdle.
So after the positive side, let me write some of the downsides that users faced. People report that it requires a high phantom power which is undesirable in some cases. If you are a beginner on the planet of audio, you may encounter switching between different patterns.
5- Zoom H4N- Best Recording ASMR Microphone
So the fourth microphone on my list of ASMR microphones is the Zoom H4N recorder and microphone. It is a recorder built for users who use their phones to record audio sessions. But because of its crisp output, it offers tough competition to its competent microphones.
Zoom H4N Recorder/Microphone falls under the decent range of microphones. Its qualities, such as its ramble-free audio standards, its capability to record four diverse channels, and phantom-powered easy input, make it so. Another great feature that this recorder offers to its users is flexibility and an effortless user interface. It comes with a manual of 150 long pages making its users understand the system effectively.
Adding more to its features is that it easily adjusts to its user’s needs without complexities. You can exchange files between Zoom H4N and other devices such as laptops and computers through a USB port available in the ZOOM H4N.
In light of the above attributes, Zoom H4N is a preferable option for newbies and professionals.
- Zoom H4N is a condenser mic.
- It follows the cardioid pattern, paired stereo with X/Y configuration.
- There are four distinct tracks available.
- Weight of microphone is 294 grams, and deminsions are 2.8 x 6.2 x 1.4″ / 71.1 x 157.5 x 35.6 mm.
- Zoom H4N supports memory cards for SD, from 16 MB up to 2 GB, and for SD, SDCH, it is between the range of 4 and 32 GB.
- H4N gives back a backed lit monochromatic LCD display.
- Has 400 mW, built-in speakers.
- Supports 16 bits for AD and 24 bits for DA conversions, respectively.
- Signal processing occurs through Compressor, Delay, EQ, Limiter, Low-Cut Filter, Pitch Controlling, and Reverb.
- Requires +24 to 48 V phantom power for standard operations.
- Plug-in power is also available, and it’s 2.5 V.
- Zoom H4N gives Analog connectivity by TRS female inputs that are available 2 x Combo XLR-1/4″ 3-Pin for Female Balanced and Unbalanced Line or Mic Inputs is as following:
1 x 1/8″ / 3.5 mm TRS Female Unbalanced Mic Input
1 x 1/8″ / 3.5 mm TRS Female Unbalanced Headphone/Line Output
- Recording time for ZoomH4N is from 1 Hour to 34 minutes in stereo form per GB for WAV is 41.1 kHz or 16 bits. It is for MP3 320 KB quality. It exceeds 6 hours and 56 minutes per GB.
- Your audio files are recorded and stored in the form of MP3 / WAV.
- Zoom H4N also offers one mini USB connection. The standard for USB is 2.0.
- For Balanced inputs, the balanced range falls between -16 dB up to +43 dB, and for unbalanced its -30 dB exceeding up to + 32 dB, respectively. Similarly, for X/Y mic capsule range is between -16 dB and +51 dB.
- The maximum level of output that Zoom H4N offers to its users is -10 dB.
- Impedance falls between 1kilo Ohms up to 470 Ohms.
- The approximate battery life is 2 hours for Alkaline batteries and 10 hours in stamina mode.
Zoom is a trusted brand by many users in the world of recorders and microphones. Users report that they produced some masterpiece recordings using this accessory. It’s handy, easy to use, and you can carry it everywhere. The versatility offers to its users is unparalleled.
Coming to the critical reviews, some users have a complaint about the outer cover of the device. It goes sticky with time, one user quotes. Multiple users complain about the brief battery life of Zoom H4N. Battery life is a problem on which that Zoom needs to work.
In short, users think that the recording quality of the device remains the best. Manufacturers need to pay attention to the infrastructure of the recorder device, such as its outer covering, buttons, and battery life.
6- Audio Technica AT875R- Best Shotgun ASMR Microphone
AT875R is the latest shotgun microphone manufactured by Audio Technica in 2018. The prime purpose of this microphone is broadcasting and recording. It is one of the brief shotgun microphones that can effortlessly go with your cameras too. Hence, it can conveniently serve vlogging purposes.
The lightweight AT875R makes it easy to microphone on the go. Audio Technica AT875R can pick different frequency sound signals, which is quality if I talk about ASMR microphones. In addition to the features, it offers a narrow acceptance angle so that you can record audio even at a distance without letting your audio be ruin by background or surrounding unwanted noises.
- Audio Technica AT875R is a condenser microphone.
- It is a shotgun microphone, hence follow line and gradient shotgun polar patterns, respectively.
- Body weights about 0.077 kg, and the length for Audio Technia AT875R are 6.89 inches.
- Devices offer 90 Hz to 20 kHz frequency response.
- Output impedance is 99 to 100 ohms for Audio Technica ATR875.
- The maximum SPL that the microphone gives is 127dB SPL.
- The signal-to-voice ratio is 74 dB for AT875R.
- The microphone works on 48 V phantom power.
- Audio Technica ATR875R processes analog signals as it is an XLR mic.
- Open circuit sensitivity for the mic is -30 dB which is 31.6 mV.
- The connector comes with three pins XLMR cables.
Audio Technica AT875R is a shotgun condenser microphone, and many users find it easy to use, especially when using it with a camera. But if a user is looking for a mic to hold in hand, you have to buy a stand. For the sake of convenience, the windscreen is part of the package that may save users money. It gives good quality worth the price. Another good reason why users buy this microphone is its easy access. This microphone is widely available across the globe. At the same time, some users report some bugs, such as unnecessary noise sometimes for that sound floor may need to be adjusted.
7- LyxPro SDPC-2- Best ASMR Microphone for Live Sessions
LyxPro SDPC-2 is a pencil microphone. It works differently from the other microphones available in the market.
It utilizes two distinct diaphragm pencils. They use it for the production of the ASMR effect. It is ideal for live sessions, and switchable polar patterns can go with any environment. The 3D effects it provides to the users go unmatched. You can use it to record key clicks or trimming sounds. If you want to record two different polar patterns, such as cardioid and Omni, at one time, this microphone is best for you.
- LyxPro SDPC-2 is an XLR pencil microphone.
- Offers changeable three polar patterns with a 3D effect.
- Weighs about 2.69 pounds, and its dimensions are 10 x 8.5 inches.
- Composed of brass and aluminum.
- Frequency response between 30 Hz to 18 kHz.
- Works on 48 V phantom power.
- Uses XLR cables for connection. A USB port is also available.
- LyxPro SDCP-2 audio sensitivity falls between 38 dB.
- The package includes a built-in foam windscreen to prevent unwanted effects arising due to surroundings.
- One eight degrees of smooth tilt is available for the easy mounting of the microphone.
- You can also use the instrument with Bluetooth connectivity.
Users usually buy this microphone to get the stereo effect in the audio. It is a satisfying experience for many users. Users report that they were able to produce good audio content while using this microphone tho it was unexpected as the price tag is low compared to the features you attain with this microphone.
If we look at the other side of the picture only problem that users report is the high self-noise of the microphone. Users face a hard time while switching between different polar patterns. But after consulting manual problem was considerably reduced.
8- ATR-2100- Best Production House ASMR Microphone
Audio Technica manufactured ATR 2100 in 2019, so you can say it is among the latest version of microphones. The prime purpose of this microphone is podcasting and live streaming providing the users with a professional-quality audio experience. It is a dynamic microphone facilitating the users to switch between USB and XLR modes of connection. It is a good option for clans who are about to step into the world of audio content and podcasting. Its ability to pick delicate voice notes and frequencies makes it a reasonable choice for the production of ASMR effects.
- Audio Technica ATR 2100 is a dynamic range microphone.
- It follows a Cardioid polar pattern.
- Audio Technica ATR 2100 weighs about 289 grams, and its dimensions are 183.0 mm (7.20″) long, 51.0 mm (2.01″)
- Audio Technica ATR 2100 frequency response reclines in the range of 50 to 15K Hz.
- Users can connect the microphone by XLR and USB means.
- Bit depth for Audio Technica ATR 2100 is 16 bits maximum.
- The sample rate for the model of the microphone is between the range of 44.1 kHz and 48 kHz.
- USB or digital input requires 5 V of power for smooth function.
- Set contains two simultaneous switches for ON/OFF and volume control.
- 5 MM of headphones jack is also part of the microphone.
- The headphone’s ideal output power for the microphone is 16 ohms.
- Accessories provided with the microphone are as follow :
Ring stand with the measurements f5 /8″-27 and threaded stands. Three-legged desk stand, 2 m (6.6′) mini USB cable with a length of 3 m (9.8′) XLRF-type to XLRM-type power line.
Users rated this product as one of the best products available in the market. The products remain to be an all-rounder for professional and beginner use. The microphone ensures that audio remains free from background and plosive noises, so it doesn’t need editing or further hard work after recording. It also goes a long way because of its durability and reliability.
If I talk about the critical side of the user experience, a hurdle in USB connectivity, sometimes. You may need to swap the stand with the time, as it is not sturdy.
But concluding all the facts, Audio Technica ATR 2100 remains in the best ASMR microphones list.
9- Neumann TLM 102- Best Indoor Studio ASMR Microphone
Neumann TLM 102 is among high-end microphones. Georg Neumann GmbH manufactured the microphone in October 2009 and to date.
It is primarily a condenser microphone with an enlarged diaphragm. The company manufactured this microphone for indoor studios. Hence, a shock mount is part of the set. Professionals use this microphone to record airy instrumental effects. It is a handy instrument that offers creative design and quality at the same time. The diaphragm of Neumann has built-in edge termination, which maximizes the Max SPL without affecting the audio quality.
- Neumann TLM 102 is a high-end condenser microphone with a large active diaphragm.
- The polar pattern obeyed by the microphone is Cardirod.
- It follows mono microphone operation mode.
- Weighs about 210 grams, and its dimensions are 2 x L: 4.6″ / 5.2 x L: 11.6 cm.
- The frequency range for the Neumann TLM 102 type of microphone falls between 20 to 20,000 Hz.
- Neumann TLM 102 is an XLR microphone, so, requires 48 V phantom power for standard operations.
- The impedance level for Neumann TLM 102 is 50 ohms by max.
- Maximum levels for SPL fall in the range of 144 dB.
- The noise level for the microphone is about 12 dB, and signal to noise ratio for this microphone is 82 dB.
- Set contains a shock mount and plosive preventive accessories.
- Uses three-pin XLR cables for connectivity.
Users find Neumann TLM 102 a good investment. The microphone is among the highly rated microphones on e-commerce websites such as Amazon and eBay. Users report that the microphone carries all the features of a premium microphone under a budget. Users were utilizing the microphone to record instruments and vocals on the major. Mic captures the slightest tone while keeping the breezy effect of the audio intact. Its small size and light weight make it easy to carry a microphone.
Some users were unhappy as switches such as ON/OFF, and volume buttons were not available.
10- SE Electronics X1 Large ASMR Microphone
sE Electronics X1 large microphone is a hand-crafted microphone. It was introduced in the market by SE electronics in 2016.
It is a condenser microphone with all the capabilities of an ideal ASMR mic. sE Electronics X1 Large is a good choice for beginners and professionals due to its handy design and crisp audio quality.
X1 is an all-rounder microphone that you can use to capture almost anything from instruments to soft hums. It comes under a reasonable price tag and is one of the best budget microphones too. The sleek and brief design of the device makes it easy to carry on your tours and travels. The microphone also does not require a very detailed set up for the application.
- X1 large microphone is a hand-tossed condenser microphone.
- sE Electronics X1 large microphone follows a cardioid pattern.
- X1 weighs about 445 grams, and its dimensions are 2.28 inches x 6.65 inches.
- The frequency range of the X1 Large microphone lies between 20 Hz to 20kHz.
- You require at least 48 V phantom power to make your sE Electronic X1 large to work.
- The sensitivity range for sE Electronics X1 Large microphone is -30.5 dB, and the maximum SPL for the set is between 140 to 160 dB.
- Signal to noise suppression ratio for sE Electronics X1 large microphone is about 85 dB.
- Impedance for an X1 large microphone is 125 ohms.
- The low-cut filter for the sE Electronics X1 Large is at 80 by 160 Hz, respectively.
- X1 large connects through XLR three pins cable.
Users rate X1 Large among decent range microphones that are worth the money you spend on these microphones. X1 large is easy to use. A user from the entertainment industry reports that he was using it for a high-end artist after some hours of receiving it. The mic went well. The mic is an excellent choice for the individuals just stepping in. The capsule for the mic is hand made fulfilling all the needs of a condenser microphone.
The overall rating for the microphone is quite decent. Users report that some X1 mics do not last long if not adequately pampered.
Buyer’s Guide for Best ASMR Microphones
When it is about choosing an ASMR microphone, many such mics are available in the market under different specifications and price tags. You have to be efficient while making a choice.
Here are some factors you should not ignore while deciding between the mics.
Self Noise of Microphone
Self-noise of a microphone can occur due to a variety of reasons.
It can be magnetism or dust accumulated in your diaphragm. But a user needs to pay prime importance to this factor. You will get many microphones available in the market that has less self-noise of their own. I will advise my readers to check out the ratio.
Sensitivity is a factor that can contribute to the success or failure of your ASMR note. There are microphones available in the market that can suppress the background noise effectively but efficiently pick even the slightest hum of the desired voice note. Go for such microphones. A microphone that is not reasonably sensitive to voice notes is not a good choice for ASMR purposes.
The polar pattern is a channel through which a mic can take up the sound via a diaphragm. One pick-up point may be ideal for one recording but not for the other. Before choosing a mic, make sure to decide the directions for your audio.
To be on the safe side, I will advise my readers to choose a multi directionality microphone that is readily available in the market.
In the journal, I quoted some of the multipolar pattern mics. You may consider these options, and I hope they’ll prove beneficial.
Another factor that plays an integral role in deciding the best microphone is its power source. There are two power inputs. One is Phantom power (For XLR Microphones), and the other is the USB power supply (For USB Mics). Experiences suggest that microphones with phantom power tend to be more efficient as compared to USB-powered mics. Moreover, mounting phantom power mic is relatively effortless as I compare it with USB power mics. I will recommend my readers choose between the two options. Either go for an XLR mic or choose a dual power mic.
The recording method, as the name indicates, is the path used to record the ASMR effect. There are two main methods. One is Omnidirectional, and the other one is Binaural. Omnidirectional path refers to the phenomenon of recording an audio input using a single microphone. Binaural points to the method of recording audio using two or more microphones simultaneously. The user aims to produce a gentle whisper needs to use an omnidirectional microphone. On the other hand, if you want to introduce a 3D audio effect such as falling chairs, Binaural is ideal for you. Users can choose according to need.
Producing ASMR effects is an art that is now widely utilized in the entertainment industry. It gives a realistic effect to the audio and keeps the audience engaged. Some examples of ASMR are clicking the sound of the keyboard, chewing food, or ball hitting the floor. It can be a 3D effect or just a low-frequency rumble. The microphone you choose to record the sounds plays a direct role in the production of the feel. There are multiple frequency microphones available in the market today, making it hard for one to decide which one to pick. Each microphone serves a different purpose. Some of the factors that you need to keep in view are as follow when it comes to choosing an ASMR mic:
the sensitivity of your microphone, its directionality, and its power source.
We consider a microphone with a decent sensitivity to the diaphragm. Low self-noise is ideal to operate for ASMR as it does not produce sounds of its own, and the diaphragm and input are more focused on the input audio signals. Phantom power and binaural are the side factors that can significantly enhance your audio. The phantom-powered microphone will produce an analog signal raising the quality of low-frequency audio. If I talk about the binaural mode of recording, as it happens in pencil microphones, it primarily depends upon the producer. If you want a 3 D effect go for a Binaural system, or otherwise monodirectional is a good option.
In the write-up, I tried to pick some of the best and economical microphones available in the trade today, such as Shure SM7B, Neumann TLM 102, LyxPro SDPC-2, and other microphones. I hope this will help my users to choose their best cleverly.
Frequently Asked Questions (FAQs)
Can I use any mic for ASMR?
The answer is no. Every mic doesn’t go with the ASMR effect. We consider XLR condenser mics to be the ideal choice for ASMR purposes. Other factors that adorn the ASMR effects are the sensitivity of the mic, its power source, and low self-noise. The polar pattern is also in determining success.
How much does ASMR MIC cost?
A good quality ASMR mic starts from 100 $ and goes up to 700 $ each. A typical mic falls in the range between 100 to 250 dollars. Here the user needs to understand that microphone is an investment that you are putting in. Choose wisely. There are some mics available in the market that are inexpensive, but they are not durable.
Why are ASMR mics so expensive?
Another frequently asked question is why ASMR mics are so expensive. The answer lies in their audio interface and signal process. They need to convert the analog signal into a digital signal for effective production. Another reason is the high-quality material they use to produce sensitive diaphragms.
How do I choose a mic for ASMR?
Some of the necessary features to keep in mind are as follow while choosing a microphone:
- Sensitivity of the mic:
ASMR effect is directly proportional to the sensitivity of your microphone. Consider a mic with a sensitive diaphragm.
- Low Self-Noise
A mic that can handle its self-noise effectively proves beneficial in recording ASMR. Low self-noise gives more focus to the incoming audio input.
- Recording Path
There is two recording pathname as omnidirectional and binaural. Omnidirectional needs a single mic input, while binaural requires two paths.
Binaural proves more beneficial in recording ASMR.
Is a Blue Yeti good for ASMR?
Blue Yeti microphones are decent microphones available in the market. Blue yeti is a good idea for entry to professional level ASMR effects. You can use it to produce brushstroke effects, whispers, etc. It is also handy and ideally easy to use.
How do I record ASMR audio?
ASMR is also known as an autonomous sensory meridian response. It is about gentle humming and low-frequency sounds.
You can record ASMR by choosing a low-frequency voice note and a sensitive microphone. The prime purpose of the effect it realistically replicates every day’s delicate voice notes. It leaves a calming effect on the listener’s mind. You frequently get it in movies and songs and some documentaries.